Milence tests megawatt truck charging from a battery-backed site
Daimler Truck, MAN and Scania joined a Hannover demonstration using a 1 MW charger and a separate 2 MWh storage system.

Milence demonstrated a battery-backed megawatt truck charger in Hannover on 14 September with Daimler Truck, MAN Truck & Bus and Scania. The installation at IAA Transportation combined an Alpitronic charger rated at up to 1,000 kW with a Pixii storage system rated at up to 1 MW and 2 MWh. The two ratings describe separate equipment. The charger supplies the vehicle, while the stationary battery can help supply the charging site when the grid connection is limited.
Milence said trucks reached 80% charge or were fully charged within demonstration stops of 30 to 45 minutes. Its account did not give each vehicle’s starting state of charge, the length of each session or a measured power curve. The result shows what the demonstration achieved with several suppliers’ trucks. A charger’s maximum output alone leaves a fleet operator without enough information to predict the energy its own truck can take during a break.
The stationary battery is another variable for sites that serve several trucks. A 2 MWh rating describes the energy the unit can store, while the 1 MW rating describes how quickly it can deliver power. For a charging provider, a battery can help cover a burst of demand during a truck stop. The ability to serve consecutive stops will also depend on how much energy the local grid connection can replace between sessions. Milence gave the storage ratings for the Hannover installation without giving its site import limit.
The demonstration followed Milence’s first Megawatt Charging System installation at the Port of Antwerp-Bruges, announced in February 2025. The port deployment used equipment from Power Electronics. Hannover used Alpitronic’s HYC1000, illustrating the choice of charging hardware within the same charging format. The display focused on compatibility across truck makes and on supplying a high-power charging point using on-site storage.
At the time of the demonstration, Milence reported almost 40 operational hubs across nine markets. It set a target of 70 hubs by the end of 2027, with more than half expected to support megawatt charging. The company said in May that it had signed a €120 million financing facility to fund work including new sites, expansion of existing hubs and further deployment of megawatt equipment. For fleet planners, the deployment schedule will determine where a truck can use the charging speed demonstrated in Hannover.